Mild Steel, Double Door Enclosure | Wall mounted - United Control Engineers India Pvt. Ltd.

Home / Products / nVent Hoffman / Mild Steel, Double Door Enclosure | Wall mounted

Mild Steel, Double Door Enclosure | Wall mounted

The mild steel double door wall mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors’ loading capacity also increases as it is divided over two doors. With a IP 55 protection degree.

Features:

Material:

Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.

Body:

Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure

Door:

Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injected one piece polyurethane gasket.

Lock:

Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.

Gland Plate Opening:

Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.

Protection:

IP 55 | TYPE 12 | IK 10. For outdoor installation, the use of a rain hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor applications.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

Finish:

Finish: RAL 7035 structured powder coating.

Wall Mounted Double Door – With Mounting Plate
Height	Width	Depth	Mounting Plate Height	Mounting Plate Width	Max. enclosure useful depth
(mm)	(mm)	(mm)	(mm)	(mm)	(mm)
600	800	300	570	750	282
800	1200	300	770	1150	282
1000	1000	300	970	950	282
1200	1000	300	1170	950	282
1200	1200	300	1170	1150	282
1400	1000	300	1370	950	282

Mild Steel, Double Door Enclosure | Wall mounted

Products

Company

Useful Links