Mild Steel Wall-Mounted Enclosures

Home / Products / nVent Hoffman / Mild Steel Wall-Mounted Enclosures

The mild steel single door wall mounted enclosure range, MAS, with a IP 66 protection degree, is available off the shelf in many different sizes. This enclosure range is well suited for many different applications.

Features:

Body:

Standard and non-standard Wall-Mounted enclosures from nVent HOFFMAN offer the product solutions to configure, modify, and customize to suit application needs and specifications.

Gland Plate Opening:

Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier

Protection:

Complies with IP 66 | TYPE 4, 12 | IK 10. For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor applications.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

Material:

Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Gland plate: 1.4 mm mild steel. Door: 1.2 mm mild steel / 1.5 mm for enclosures with a height or width of 500 mm or greater / 2 mm for enclosures with a height or width of 800 mm or greater. Mounting plate: 2 mm galvanized steel.

Lock:

Lock: nVent HOFFMAN customized double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking for 1000 mm high enclosures and above. Other inserts are available as an accessory.

Finish:

Finish: RAL 7035 structured powder coating.

Door:

Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. Inner M6 welded studs to mount door profiles MMDP, see delivery. Sealing is ensured by an injected one piece polyurethane gasket.

Wall Mounted Single Door – With Mounting Plate
Height	Width	Depth	Mounting Plate Height	Mounting Plate Width	Max. enclosure useful depth
(mm)	(mm)	(mm)	(mm)	(mm)	(mm)
200	200	155	170	150	137
250	200	155	220	150	137
250	250	155	220	200	137
300	250	155	270	200	137
300	250	210	270	200	192
300	300	155	270	250	137
300	300	210	270	250	192
300	400	210	270	350	192
350	250	155	320	200	137
400	300	155	370	250	137
400	300	210	370	250	192
400	400	210	370	350	192
400	500	210	370	450	192
400	600	210	370	550	192
500	300	210	470	250	192
500	400	155	470	350	137
500	400	210	470	350	192
500	400	260	470	350	242
500	400	300	470	350	282
500	500	210	470	450	192
500	500	300	470	450	282
600	400	155	570	350	137
600	400	210	570	350	192
600	400	260	570	350	242
600	400	300	570	350	282
600	500	155	570	450	137
600	500	210	570	450	192
600	500	260	570	450	242
600	500	300	570	450	282
600	600	210	570	550	192
600	600	300	570	550	282
600	600	400	570	550	382
600	800	300	570	750	282
700	500	210	670	450	192
700	500	260	670	450	242
800	400	300	770	350	282
800	600	210	770	550	192
800	600	260	770	550	242
800	600	300	770	550	282
800	600	400	770	550	382
800	800	210	770	750	192
800	800	300	770	750	282
800	800	400	770	750	382
1000	600	260	970	550	242
1000	600	300	970	550	282
1000	800	260	970	750	242
1000	800	300	970	750	282
1000	800	400	970	750	382
1200	600	300	1170	550	282
1200	800	300	1170	750	282
1200	800	400	1170	750	382

Mild Steel Wall-Mounted Enclosures

Products

About Us

Useful Links